Description
The compressed air is being fed into the pre-cooler (for high temperature type) for heat dissipation, and then flows into the heat exchanger for heat exchange with the cold air discharged from the evaporator, so that the temperature of the compressed air entering the evaporator is lowered. After the heat exchange, the compressed air flows into the evaporator to heat exchange. The condensed water is condensed into water droplets, which rotate at a high speed separator, and the water is separated from the air due to centrifugal force. After separation, the water is discharged from the automatic drain valve. The dew point of the air pressure after cooling can be as low as 2°C. The cooled air flows through the air heat exchange to heat exchange with the high temperature. The cold air absorbs the heat of the inlet air to increase the temperature, and the compressed air also passes through the secondary condenser. it makes the temperature of the outlet fully heated to ensure that the outlet air pipeline does not condense. At the same time, the cold source of the outlet air is fully utilized to ensure the condensation effect of the air dryer and the quality of the outlet air.
Features
● Purification package incl. refrigerant dryer with integrated pre and after filters and condensate drains.
● Integrated pre filter, type V for protection of the compressed air dryer against contaminations, Integrated after filter for the removal of oil aerosols and particles with high retention efficiency and very low differential pressure;Safe compliance with the compressed air quality at low energy costs.
● Extremely compact design with robust steel housing. No additional pipings for installation of pre and after filter required.
● Electronic level-controlled condensate drain incl. function monitoring and alarm messages for discharging of the compressed air condensate at the heat exchanger. Optional with pre and after filter upgradeable.
● Electronic controller with Dewpoint indicator, operating time counter, alarm display.
● 12 sizes for nominal flow rates up to 3300 m³/h enable accurate selection of the suitable refrigerated compressed air dryer on the respective actual flow rate.
Technical Data
