-
Temperature Controls
The KP Thermostats are single-pole, doublethrow (SPDT) temperature-operated electric switches. They can be connected directly to a single phase AC motor of up to approx. 2 kW or installed in the control circuit of DC motors and large AC motors.
-
Temperature transmitter
Pressure transmitters type EMP 2 convert pressure to an electric signal.
This is proportional to, and linear with, the value of the pressure to which the pressure-sensitive element is subjected by the medium. The units are supplied as two-wire transmitters with an output signal of 4- 20 mA.
The transmitters have a zero-point displacement facility for equalizing static pressure.
-
Expansion valve
Thermostatic expansion valves regulate the injection of refrigerant liquid into evaporators. Injection is controlled by the refrigerant superheat.
Therefore the valves are especially suitable for liquid injection in “dry” evaporators where the superheat at the evaporator outlet is proportional to the evaporator load.
-
Deluxe manifold
Deluxe service manifold is equipped with high and low pressure gauges and an optical sight glass to observe the refrigerant as it flows through the manifold. This benefits the operator by assisting in assessing the operating performance for a refrigeration system and assisting during recovery or charging processes.
-
Pressure controls
KP pressure switches are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure.
-
Digital Vacuum gauge
Vacuum measuring device to control the evacuation process on the construction site or in the laboratory.
-
Pressure gauge
This series of pressure gauges is well suited for application in the refrigeration industry. The differential pressure gauge is specifically intended for stamping compressors for measuring suction and oil pressure.
-
Digital weighing platform
The weighing platform is used for refrigerants charging, recovery & weighing of commercial A/C, refrigerants systems. High capacity up to 100kgs (2201bs). High accuracy of +/-5g (0.01lb). high-visibility LCD display. Flexible 6 inches( 1.83m) coil design. Long life 9V batteries.
-
Pressure transmitter
AKS 3000 is a series of absolute pressure transmitters with high-level signal conditioned current output, developed to meet demands in A/C and refrigeration applications.
-
Recovery cylinder
Small cylinder for recovering refrigerants during servicing or maintenance work onboard.
-
Refrigerant dryer
All ELIMINATOR® driers have a solid core with binding material held to an absolute minimum.
There are two types of ELIMINATOR® cores. Type DML driers have a core composition of 100% Molecular Sieve, while type DCL contain 80% Molecular Sieve with 20% activated alumina.
-
Refrigerant leak detector
Refrigerant leak detector able to detect all halogen refrigerants (CFC, HCFC and HFC) enabling you to find leaks in your refrigeration system. Refrigerant Leak Detector is a perfect tool for maintaining the air-condition or a cooling system with compressor and refrigerant. This unit uses a newly developed semi-conductor sensor which is extremely sensitive for variety of general used Refrigerant.