-
Copper tubes with aluminum Heating coils
The heating coils are made from a series of copper tubes with aluminum or copper fins to increase the heat transfer surface areas. Either a heating fluid is circulated through the tubes whilst a hot air stream passes over the tubes and fins. The heating coils for the hot water or steam housed in a sheet steel frame. The steam is supplied and discharged through headers with connections extended through the access side of the air handling unit.
-
Compact and horizontal type Fresh water Cooled Condenser
The Shell and tube heat exchanger in our company has achieved remarkable results in energy saving and efficiency, increasing heat transfer efficiency, reducing heat transfer area, lowering pressure drop, and improving thermal strength of the plant. Based on petroleum, chemical, electric power, metallurgy, shipbuilding, machinery, food, pharmaceutical, and other industries to stable demand growth of the heat exchanger.
-
Copper tubes with aluminum Cooling evaporator coil
Cooling evaporator coil is suitable for various refrigerants such as R22, R134A, R32, R290, R407c, R410a etc. The air conditioner’s evaporator coil, also called the evaporator core, is the part of the system where the refrigerant absorbs heat from the air inside the home. That is, it’s where the cold air comes from. It is often located on the inside of the AHU. It works with a condenser coil to complete the heat exchange process that produces cool air.
-
Coaxial Sleeve Heat Exchanger
There is no internal solder joint in the whole safe internal pipe to ensure the long-term stable operation of the system. There is no blind area of water flow in the channel on the water side, the flow velocity of the water channel is uniform, and it is not easy to freeze locally.
-
Copper tubes with aluminum Air Cooler
The high and low temperature air cooler uses finned coils of Freon direct evaporate type and force air to circulate by fan to reach the cooling effect. It has the feature of small volume of refrigerant, high efficiency cooling, fast cooling speed, even room temperature, compact structure, small volume, light weight and easy installation and maintenance etc.
-
PAC Centrifugal Fan with forward curved impellers
The fan section in the PAC is centrifugal fans with forward curved impellers. tablocked on both sides to two steel rings and to a double disk at the centre. The blade is designed to minimize the loss caused by air turbulence and to obtain maximum efficiency with minimum sound level. The fans are suitable for supply or extract applications in commercial, process and industrial HVAC systems. The fan draws the fresh air into the air conditioner and discharges it to the room after it is cooled by the evaporator.
-
Axial fan with aluminum fan blades
Axial fans with aluminum fan blades, fitted with robust epoxy coated fan guards in anti-vibration mountings. Motors are equipped with a thermal safety device built in the windings, connected to separate terminals in the terminal box. This safety device can therefore be integrated into the control circuit. The electrical control should be arranged preferably with a manual reset device in order to prevent continuous on/off switching (tripping) of the motors.
-
Double inlet AHU Centrifugal Fan
The fan section in the AHU consist of double inlet centrifugal fan, motor and V-belt drive mounted on an inner frame which is suspended by means of anti-vibration mountings in an outer frame which can be pulled out. The fan unit is mounted in two transverse rails fastened to the air handling unit, and the fan outlet opening is connected to the discharge panel of the unit by means of a flexible connection.
-
The High temperature of air cooled refrigerated air dryer
The compressed air is being fed into the pre-cooler (for high temperature type) for heat dissipation, and then flows into the heat exchanger for heat exchange with the cold air discharged from the evaporator, so that the temperature of the compressed air entering the evaporator is lowered.
-
SECOP hermetically reciprocating compressor
Secop is the expert for advanced hermetic compressor technologies and cooling solutions in commercial refrigeration. We develop high performance stationary and mobile cooling solutions for leading international commercial refrigeration manufacturers and are the first choice when it comes to leading hermetic compressors and electronic controls for refrigeration solutions for light commercial and DC-powered applications. Secop has a long track record of successful projects to adopt energy efficient and green refrigerants that feature innovative solutions for both compressors and control electronics.
-
Panasonic scroll compressors
Panasonic scroll compressors have high reliability proven in decades of market applications. They are designed with low sound and high adaptability to ambient temperature, as well as less space occupation in saving place and energy. Panasonic will keep devoted to advanced technology and continuously provide highly reliable scroll compressors with a wide variety of power source and various applications of environment-friendly refrigerant.
-
Mitsubishi compressor Quality OEM parts
Mitsubishi semi-hermetic type compressors are for inside motor drive and the compressor and the motor are connected and housed in the same housing, the cover of each part is tightened by bolts No shaft seal is required, because no gas leakage occurs.