-
Compact and horizontal type Sea water Cooled Condenser
Heat exchanger also called heat transfer machine, is the equipment that can transfer certain heat from the thermal fluid to the cold fluid. It is the essential equipment to achieve the heat exchange and transfer during the production process. It’s the evaporator that the cold water flows in the tube and the refrigerant evaporates in the shell. It’s one of the main styles of refrigerating unit that cool the secondary refrigerant. It commonly adopt horizontal type, which has the characteristic of effective heat transfer, compact structure, small occupied area and easy installation etc.
-
Horizontal and vertical liquid receivers
The function of the liquid receiver is to store the liquid refrigerant supplied to the evaporator. After the high-pressure refrigerant passes through the heat dissipation effect of the condenser, it becomes a gas-liquid two-phase state, but the refrigerant must enter the evaporator in a liquid state. Good cooling effect, so a liquid receiver must be installed behind the condenser to store the high-pressure refrigerant here, and then the liquid refrigerant drawn from the bottom is sent to the evaporator, so that the evaporator can play its best state. Achieve the best cooling effect.
-
High-efficiency and compact Brazed Plate Heat Exchanger
Brazed plate heat exchanger is a kind of partition heat exchanger. It is a new type of high-efficiency heat exchanger made by stacking a series of metal sheets with a certain corrugated shape and brazing in a vacuum furnace. Thin rectangular channels are formed between various plates, and heat exchange is carried out through the plates.
-
Copper tubes with aluminum Heating coils
The heating coils are made from a series of copper tubes with aluminum or copper fins to increase the heat transfer surface areas. Either a heating fluid is circulated through the tubes whilst a hot air stream passes over the tubes and fins. The heating coils for the hot water or steam housed in a sheet steel frame. The steam is supplied and discharged through headers with connections extended through the access side of the air handling unit.
-
Compact and horizontal type Fresh water Cooled Condenser
The Shell and tube heat exchanger in our company has achieved remarkable results in energy saving and efficiency, increasing heat transfer efficiency, reducing heat transfer area, lowering pressure drop, and improving thermal strength of the plant. Based on petroleum, chemical, electric power, metallurgy, shipbuilding, machinery, food, pharmaceutical, and other industries to stable demand growth of the heat exchanger.
-
Copper tubes with aluminum Cooling evaporator coil
Cooling evaporator coil is suitable for various refrigerants such as R22, R134A, R32, R290, R407c, R410a etc. The air conditioner’s evaporator coil, also called the evaporator core, is the part of the system where the refrigerant absorbs heat from the air inside the home. That is, it’s where the cold air comes from. It is often located on the inside of the AHU. It works with a condenser coil to complete the heat exchange process that produces cool air.
-
Coaxial Sleeve Heat Exchanger
There is no internal solder joint in the whole safe internal pipe to ensure the long-term stable operation of the system. There is no blind area of water flow in the channel on the water side, the flow velocity of the water channel is uniform, and it is not easy to freeze locally.
-
Copper tubes with aluminum Air Cooler
The high and low temperature air cooler uses finned coils of Freon direct evaporate type and force air to circulate by fan to reach the cooling effect. It has the feature of small volume of refrigerant, high efficiency cooling, fast cooling speed, even room temperature, compact structure, small volume, light weight and easy installation and maintenance etc.